Print Speed - Epson tm-m30 Technical Reference Manual

Print speed

Selectable from levels 1 to 10 (Slow ~ Fast)
Initial setting: level 10
Character code table defaults
Selectable from 43 pages including user defined page
International character defaults
Selectable from 18 sets
Command execution during offline
 Enabled (initial settings)
 Disabled
Amount of top margin by backfeed
 2.0mm (initial settings)
 9.5mm (no backfeed) (initial settings)
Interface switch waiting time
Select from 1 to 10 seconds (in intervals of 1 second)
1 second (initial setting)
Main connection interface
 Auto (interface that receives data first) (initial setting)
 USB
 Bluetooth
 Ethernet/Wi-Fi
 No main connection I/F
46
Depending on print conditions, such as print duty, print head temperature, and data transmission
speed, print speed is automatically adjusted, which may cause white lines due to intermittent print
(the motor sometimes stops). To avoid this, keep the print speed constant by setting it lower.
 Remove all ejected paper before printing with backfeed.
 Disable the automatic top logo setting when enabling backfeed.
 You cannot use backfeed in the following cases even if you have enabled backfeed.
 Immediately after auto cutting while the cover is closed.
 While the self-test is in progress.
 You can specify values in 0.5mm steps if you use TM-m30 Utility or TM Utility for iOS/Android.