Table of Contents
Advertisement
Night Mode
Night mode reduces the volume differences between loud
and quiet passages. At night, you can enjoy surround effects
at low volume without disturbing your children or
neighbors. Night mode is available only for Dolby Digital
and MPEG multi-channel signals and only if supported by
the source material (e. g. a movie).
Press SYSTEM MENU on the remote control.
1
DVD: Select Preferences
2
INTERNET, PC LINK: Select Audio
DVD
Sound
Preferences
Night mode
off
Analogue Output
ClearVoice
Use = to toggle the value, ≠ or ± to move to other options.
Press 2 repeatedly to switch Night Mode on or off. Next,
3
press 2OK to confirm.
Analogue Output
This feature is similar to selecting the surround sound with
SURROUND on the remote control.
Press SYSTEM MENU on the remote control.
1
DVD: Select Preferences
2
Output.
INTERNET, PC LINK: Select Audio
Output.
Press 4 repeatedly to select Multi-channel, Hall or
3
Stereo. Next, press 2OK to confirm.
Note: If you connected any equipment (e. g. a tape deck) to
LINE OUT on the Streamium System and the equipment is
suited for stereo signals only, set Analogue output to
Stereo.
Sound
Night Mode.
Night Mode.
Stop
View
Program
on
Sound
Analogue
Analogue
System Menu – Audio settings
Digital Output
Adjust Digital Output if you have connected the Streamium
System´s DIGITAL OUT to external digital equipment.
Press SYSTEM MENU on the remote control.
1
DVD: Select Setup
2
INTERNET, PC LINK: Select Audio
Press 3 or 4 to select
3
– Off if you do not use DIGITAL OUT in your
connections.
– PCM only if you use DIGITAL OUT in your
connections, but the Stereo equipment does not include
a built-in digital multi-channel decoder.
– All if you have connected the Streamium System to
Stereo equipment that has a built-in multi-channel
decoder.
Next, press 2OK to confirm.
4
Audio Menu
Digital Output.
Digital Output.
41
Advertisement
Table of Contents
