Picture and video settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Video], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[TV Display]: Select a picture format
•
to fit the TV screen.
[HDMI Video]: Select the resolution of
•
video signal that is output from HDMI
OUT (ARC) on your home theater.
To enjoy the selected resolution,
make sure that your TV supports the
selected resolution.
•
[HDMI Deep Color]: Recreate the
natural world on your TV screen by
displaying vivid images using billion
colors. Your home theater must be
connected to a Deep Color enabled
TV through an HDMI cable.
[Picture Settings]: Select pre defined
•
color settings for the video display.
[Watch 3D video]: Set HDMI video to
•
support 3D or 2D video.
Note
•
If you change a setting, make sure that the TV supports
the new setting.
Audio settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Audio], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Night Mode]: For quiet listening,
•
decrease the volume of loud sounds
on your home theater. Night mode is
only available for Dolby-encoded DVD
and Blu-ray discs.
[HDMI Audio]: Set the HDMI audio
•
output from your TV, or disable HDMI
audio output from the TV.
•
[Default sound settings]: Restore
the equalizer settings of all the sound
modes to the default values.
Parental control settings
1
Press
(Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
•
[Change Password]: Set or change your
password for parental control access.
If you do not have a password or have
forgotten your password, enter 0000.
•
[Parental Control]: Restrict access
to discs that are recorded with age
ratings. To play all discs, irrespective of
the ratings, select 8 or [Off].
EN
23