Audio Settings; Parental Control Settings; Display Settings; Energy Saving Settings - Philips HTB3510 User Manual

Audio settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Audio], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Night mode]: For quiet listening,
•
decrease the volume of loud sounds
on your home theater. Night mode
is only available in DVDs and Blu-ray
discs with Dolby Digital, Dolby Digital
Plus, and Dolby True HD soundtracks.
[HDMI Audio]: Set the HDMI audio
•
output from your TV, or disable HDMI
audio output from the TV.
[Speaker Setup]: Set up speakers for
•
best surround sound experience.
[Default sound settings]: Restore
•
the equalizer settings of all the sound
modes to the default values.

Parental control settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Change Password]: Set or change
•
your password for parental control
access. If you do not have a password
or have forgotten your password, enter
0000.
[Parental control]: Restrict access
•
to discs that are recorded with age
ratings. To play all discs, irrespective of
the ratings, select 8 or [Off].

Display settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Auto subtitle shift]: Enable or disable
•
automatic repositioning of subtitles on
TVs that support this feature.
• [Display panel]: Set the brightness of
the home theater front panel display.
[VCD PBC]: Enable or disable the
•
content menu navigation of VCD and
SVCD discs with Play Back Control
feature.

Energy saving settings

1
Press (Home).
2
Select [Setup], and then press OK.
3
Select [Preference], and then press OK.
4
Press the Navigation buttons and OK to
select and change:
[Screen saver]: Switch the home
•
theater to screen saver mode after
10 minutes of inactivity.
[Auto standby]: Switch the home
•
theater to standby after 30 minutes of
inactivity. This timer works only when a
disc or USB play is paused or stopped.
• [Sleep timer]: Set the duration of the
sleep timer so that the home theater is
switched to standby after the specified
period.
EN
25