Table of Contents
Advertisement
Connecting ...
Connecting to power supply
ANTENNA
AM
The type plate is located on the rear of the unit.
Check whether the power voltage as shown on the type
1
plate corresponds to your local power voltage. If it does
not, consult your dealer or service organization.
Make sure your TV is switched off before connecting the
2
Streamium System to the power supply for the first time.
Make sure all connections have been made before
3
switching on the power supply.
Connect the supplied power cable to MAINS ~ at the rear
4
of the Streamium System and to the power outlet.
When the unit is switched to standby (off), it is still
consuming some power. To disconnect the unit from the
power completely, remove the power plug from the
wall outlet.
To avoid overheating of the unit, a safety circuit has
been built in.Therefore your unit may disconnect
under extreme conditions. If this happens, unplug the
unit and let it cool down before reusing it.
16
FM
Switching on the system
DVD
INTERNET
TV
(UN) MARK
FAVORITES
ANGLE
SUBTITLE
SYSTEM
MENU
Press STANDBY-ON on the Streamium System or one of
the source buttons on the remote control (DVD,TV,
TUNER, AUX, INTERNET, PC LINK) to switch on the
Streamium System.
Selecting a source
Turn SOURCE on the Streamium System or press DVD,
INTERNET, PC LINK,TUNER,TV or AUX on the remote
control to select a source.
The selected source will be displayed.
On the remote control:
– To select disc 1, 2, ... 5, press DVD repeatedly.
– To select equipment connected to AUX IN or
DIGITAL IN on the Streamium System, press AUX
repeatedly.
Switching to Eco Power standby
Press STANDBY-ON on the Streamium System or 2 on
the remote control.
The STANDBY-ON button will light up on the system.
The display screen will go blank.
Note:The Streamium System will switch to Standby
automatically after 20 minutes of no activities, if "Sleep timer"
is switched on in the System Menu and if DVD or INTERNET is
selected.
TUNER
PC LINK
AUX
VIEW
ZOOM
AUDIO
DISC
MENU
Advertisement
Table of Contents
