Hobart 5359D Operation And Maintenance Manual page 94

c
ON 2012
*Fuel filters and
stminers
furnished after December
have NO OFCAIN VALVES.
1. Fuel filter
* 2. Drain valve
3. Fuel strainer
Fue I Filter and Strainer (Typical)
Figure 9
(f)
Discard the element
and
gasket.
(g) Wash the she/I with f I 'I
ue 01 and dry with a lint-free cloth and/or com-
pressed air.
(h)
Place the new element, which has been'thoroughly soaked in clean fuel
oil (step
(a)
above), in the shell and push it down on the seat.
(i) Close the drain valve and fill the shell about two-thirds full of clean
fuel oil.
(i) Jnstaif a new
gasket
and position the shell and element to the cover. In-
stall the cover bolt. Be sure the gasket, cover, and shell mate perfectly.
Tighten the bolt only enough to.prevent fuel leakage.
2-1
Page 12
Aug 25, /85