Hobart 5359D Operation And Maintenance Manual page 184

(7) "FIGURE-l7EM NO ." +mn
This column lists the figure number of the illustration applicable to a particular
: ' parts fist and also identifies each part in the list by an item number. These item
numbers also appear on the illustration.
Each item number on an illustration is
connected ta the part to which it pertains by a ieader tine. Thus the figure and
item nunbering system ties the parts lists to the illustrations and vice versu. The
figure and index numbers a@ also used in the numerical index to assist the user
in finding the illustrationof a part when the part number is krpwn.
. (2) "HOBART PART'NUMBER" Column
ALi part nunben appearing in this column are Hobart numbers.
In all instances
where the part is a purchased item, the vendor's identifying five-digit code and
his part number will appear in the "NOMENCLATURE" column. Vendor parts
which are modified by Hobart will be identified as such in the "NOMENClATURE"
cqlumn, In
case Hobart does not have an identifying part number for a purchased
part, the "HOBART PART NUMBER" column will reflect "No Number" and the
vendor's number will be shown in the "NOMENCLATURE" column.
Parts man-
ufactured by Hobart will tiflect na vendor code or part
number
in the "NOMEN-
. UATURE " column.
.
(3) ,"NOMENCLATUk" Cotmn
.
.
The item identifying ncrne appears in this column. 'The indenture &thod is used
to indicate item relationship. Thus, components of an assembly are listed directly
below the assembly and indented one space . -Vendor cades,and part numbers. for
purchased parts are shown in -this column. -. Hobart modification to vendor items
is also noted in this'column.
'(4) "EFF" (Effective) Column
.
This column is used to indicate the applicability of parts to different models of
equipment. When more than one modei of equipment is covered by a parts
list, there ate same parts which are used on
only one
model.
This column is
used br insertion of a code letter "A", "B", etc. , to indicate these pcrts and
to identify the particular model they are used on. Parts in this manual are
coded as follows:
.
Uncoded ports are usable an all made k.
Parts coded "A" are usable on Specs 5359Q-1 only.
Parts coded "8" are usable on Specs 53594-Z only.
.
Parts coded "C" are usable an Specs 53590-3 only.
Parts coded "D" are usable on Specs 5359Q- 9' only.
4-l
Page 2
Aug 254~
_____-