15. Controls
15.1. M0STAT60Q-1 Wireless Remote
1
2
3
4
5
6
15.1.1. Buttons
ON/OFF
Turns system on and off.
MODE
S elect system operation modes. Push button to cycle through each setting.
AUTO
COOL
FAN
S elect fan speed. Push button to cycle through each setting.
AUTO
LOW
ME
NOTE:
Not available in AUTO or DRY modes.
SLEEP
E nables the system to automatically increase cooling or decrease heating (in 2°F increments) per hour for the first 2 hours,
then maintain a steady temperature for 5 hours.
NOTE:
To cancel, push the "MODE", "FAN SPEED" or "ON/OFF" buttons.
NOTE:
SLEEP mode is only available when the unit is in COOL, HEAT or AUTO mode.
TURBO
E nables the unit to reach the preset temperature during cooling or heating operation in the shortest time.
SELF CLEAN
A utomatically cleans and dries the evaporator coil at the end of the cooling season, preventing any odors or mildew.
UP/DOWN
I ncrease or decrease the indoor temperature in one degree increments (maximum 86°F, minimum 62°F).
NOTE:
Temperature cannot be adjusted in FAN mode.
NOTE:
Press and hold and buttons together for 3 seconds to alternate the temperature display between the °C and °F
scale.
SILENCE/FP
•
S ilence - Operates the compressor at low frequency and low fan speed to reduce operating sound levels to a
minimum.
•
F P - Only available during heating operation. Unit will operate at a set temperature of 46°F.
Furnished with Wall-Mounted Indoor Units, Cassette
Indoor Units and Ceiling/Floor Indoor Units.
NOTE:
7
8
ON/OFF
SILENCE
FP
TIMER
MODE
ON
9
TEMP
TIMER
FAN
OFF
10
SLEEP
SWING DIRECT
11
TURBO
SELF
12
LED
FOLLOW
CLEAN
ME
13
HEAT
DRY
FAN
D
HIGH
Can be ordered separately for ducted indoor units.
•
Complete remote control of system. Maximum operating range is
25 ft.
•
Operates on two AAA 1.5V batteries (furnished).
•
Wireless remote control holder furnished. Holder can be mounted
on a wall for easy access. Mounting screws furnished.
82