Toshiba e-STUDIO477S Service Manual page 71

3.2.35 Antenna (for wireless model only)
(1) Remove the screw (silver/8mm) ① .
(2) Remove the FAX PCB.(Refer to 3.2.8)
(3) Remove the two clamp-cable and core and disconnect the connector.
(4) Remove the Antenna ② .
45387101TH Rev.1
①
②
Clamp
Core
Clamp
3.2.36 Stapler (for stapler model only)
(1) Remove the plate shield. (Refer to 3.2.8).
(2) Remove the two screws (silver) ① and remove the Staple ② .
3. Component replacement
②
①
2
3-33 /