Toshiba e-STUDIO477S Service Manual page 145

(6) Hold the fuser unit handle and lift the fuser unit out of the printer.
Do not touch the fuser unit. It is hot.
Fuser unit
(7) Tilt the release lever on the fuser unit forward, and be sure to pull out the jammed
paper forward gently.
45387101TH Rev.1
Possible to get burned.
Release lever
(8) Hold the fuser unit handle and return the fuser unit into its original position.
Fuser unit
(9) Return the ID unit into the printer carefully.
ID unit
(10) Close the top cover.
(11) Close the front cover.
Note! Cannot close the front cover securely if the top cover is not closed.
6. Troubleshooting and repair procedure
6-25 /