Feeder-Assy-Regist / Clutch - Toshiba e-STUDIO477S Service Manual

3.2.17 Feeder-Assy-Regist / Clutch

(1) Remove the Cover-Side-L and Cover-Side-R. (Refer to 3.2.4 / 3.2.5)
(2) Remove the scanner. (Refer to 3.2.6)
(3) Remove the Plate-Board-R-Assy. (Refer to 3.2.9)
(4) Remove the DC motor (hop). (Refer to 3.2.11)
(5) Remove the screw (black) ① , and disengage the Stay-Arm-Front from the Plate-
Assy-Side(L)
(6) Remove the two screws (silver) ② , and remove the Cover-Front-Side-R ③ .
(7) Remove the two screws (silver) ④ , and remove the Cover-Front-Side-L ⑤ .
①
Stay-Arm-Front
⑤
④
②
45387101TH Rev.1
③
(8) Remove the two screws (silver/8mm) ⑥ , and remove the Plate-Front ⑦ .
(9) Remove the five screws (silver) ⑧ and the two screws (silver) ⑨ , and remove the
Feeder-Assy-Regist ⑩ .
⑥
⑧
⑨
⑩
⑥
⑧
⑨
3. Component replacement
⑦
⑥
⑧
⑨
⑧
3-14 /