Gw Controller - Ricoh S-C3 F Service Manual

GW Controller

Overview
This machine uses the GW architecture. To enable printer features, install the printer option SD Card in the
controller.
Main components:
• CPU: TOSHIBA TMPR4955BFG-300
• CHARANGO: GW architecture ASIC. It controls all the functions of the controller board.
• Flash ROM: 16 MB Flash ROM for the system program
• SDRAM: On board 128 MB, DIMM 256 MB (resident)
• NVRAM: Stores the controller settings
• LAN interface
• USB 2.0 interface
• SD Card: Printer/Scanner program
GW Controller
6
297