Bluetooth Installation - Ricoh S-C3 F Service Manual

Installation Procedure
1. Remove the interface cover [A] ( x 2).
2. Install the IEEE 1284 board into interface slot A [B] ( x 2).
3. Turn on the main power switch.
4. Print out the configuration page (User Tools/Counter > Printer Features > List/Test Print), and then
check that this device is detected.

Bluetooth Installation

• Unplug the machine power cord before starting the following procedure.
Component Check
No. Description
1 Wireless Adapter
2 Bluetooth Card
Controller Options
1
Q'ty
1
1
39