Cd Changer Controls - Audiovox Rampage AXTM600 Owner's Manual

Electronically-tuned am/fm/mpx radio with auto-reverse cassette player, cd player, cd changer controls and quartz clock
Hide thumbs Also See for Rampage AXTM600:
Table of Contents

Advertisement

CD CHANGER CONTROLS

Built into this radio are controls to operate an optional 10-disc or 6-disc CD
changer. Please check with your SPS/Audiovox or Prestige car stereo specialist
for recommendations of the models that will work with this radio.
Adjustments of the audio functions (volume, tone, balance, and fader) operate
in the same manner during CD changer play as they do for radio, CD, and
cassette play. The following controls will operate the CD changer when it is
installed and connected to this radio. Refer to the owner's manual included with
the CD changer for instructions on the installation and correct loading and use
of the CD magazine.
dm
MODESELECTOR(MODE)
With the CD changer connected to the unit, this button is used to select CD
changer operation. To choose CD changer mode, press the button until the
"DISC", "TRACK" and
the Mode button again to change back to radio, CD player or tape operation.
dn
do
&
DISC SELECT (DISC
These buttons are used to select the desired disc for play. To advance to a
higher number disc, press the "DISC
disc, press the "
DISC " button
shown on the display panel.
dp
TRACK SELECT (
This button is used to quickly select the beginning of a particular track. Tap the
Forward Track Select (
side of the button to locate the desired track as shown by the track number on
the display panel.
dq
CUE/REVIEW FUNCTIONS (
High-speed audible search to any section of the disc can be made by the Cue
and Review functions. Press and hold the Cue (
rapidly in forward direction or the Review (
rapidly in the backward direction.
When the Cue (
) side of the button is held down and the end of the last track
on the disc is reached or the Review (
the beginning of the first track is reached, the unit will enter the Pause mode
(
will flash on the display panel) until the button is released.
dr
PAUSE SELECTOR ( )
Pressing this button will temporarily stop play of the disc (the
will flash on the display panel). Press the button again to resume play of the disc
from the point at which it had stopped. Pause mode will also be cancelled by
activating any other disc changer function.
indications appear on the display panel. Press
) (
DISC)
dn
" button
do
. The number of the disc in play will be
TRACK
)
) side of the button or Backward Track Select (
/
)
) side of the button to advance
) side of the button to advance
) side of the button is held down until
-8-
. To return to a lower number
indication
)

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gc-600Sps gc-600

Table of Contents