Cd Changer Controls - Audiovox AV415 Owner's Manual

CD CHANGER CONTROLS

Built into this radio are controls to operate an
optional CD changer. Please check with your
Rampage/Audiovox car stereo specialist or call
1-800-645-4994 for recommendations of the
models that will work with this radio.
Adjustment of the audio functions (volume,
tone, balance, and fader) for the CD changer
operate in the same manner as they do for radio
play. The following controls will operate the CD
changer when it is installed and connected to
this radio. Refer to the owner's manual included
with the CD changer for instructions on the
installation and correct loading and use of the
CD magazine.
CD CHANGER MODE SELECTOR (MODE)
During radio or CD play, press this button to
select operation of the CD changer as shown
by CdC on the display panel. Disc play will begin
and the disc and track number will be shown on
the display panel. If a new magazine has been
loaded into the changer, play will begin from the
first track of the first disc in the magazine. If a
magazine was already in the changer, play will
resume from the track on the disc previously in
play.
DISC SELECT (CD+ & CD-)
These buttons are used to select the desired
disc for play. To advance to a higher number
disc, press the DISC CD+ button. To return to
a lower number disc, press the DISC CD- button.
The number of the disc in play will be shown on
the display panel.
TRACK SELECT (
The Track Select functions are used to quickly
access the beginning of a particular track. Each
time the Forward Track Select (
button is pressed, the next higher track number
will be selected as shown on the display panel.
Similarly, each time the Backward Track Select
(
track number will be selected as shown on the
display panel.
High-speed audible search to any section of the
disc can be made by the Cue and Review
functions. Press and hold the Cue (
the button to advance rapidly in the forward
direction (the disc play symbol will rotate foward
on the display panel) or the Review (
the button to advance rapidly in the backward
direction (the disc symbol will rotate backwards
on the display panel).
The RPT indication will appear in the display
panel and the current track will be repeated.
Pressing this button a second time will
cause the DISC-RPT indication to appear
on the display. In this case, play of the
current disc will be continuously repeated.
Pressing the button a third time will
deactivate this function.
During optional CD changer disc play, press
this button to play the first 10 seconds of
each track on the disc (INT will appear on
the display panel). When a desired track is
reached, press the button again to cancel
the function (INT will disappear from the
display panel) and play of the selected
track will continue. Intro-Scan mode will
also be canceled by activating the Repeat
Play
/
)
The indication RND will appear on the
display panel. Pressing and holding the
button again for several seconds will
) side of the
deactivate this function. While random play
is active, pressing this button momentarily
will activate the LOUD function as before.
) side of the button is pressed, the next lower
CUE/REVIEW FUNCTIONS (
DISC/TRACK REPEAT PLAY (RPT)
INTRODUCTION TRACK PLAY
cr
function.
RANDOM TRACK SELECTION (RND)
/ )
) side of
) side of
12 12 12 12
12