Audiovox Rampage AXTM600 Owner's Manual page 7

cq
REPEAT PLAY SELECTOR (RPT)
During disc play, press this button to repeat the play of the selected track ("RPT"
will appear on the display panel). Play of the track will continue to repeat until
the button is pressed again and the "RPT" indication disappears from the display
panel. The Repeat Play mode will also be cancelled by activating the Track
cp
Scan or Shuffle Play
cr
SHUFFLE PLAY SELECTOR (SHF)
During disc play, press this button to play the tracks on the disc in a random,
shuffled order ("SHF" will appear on the display panel). The Track Select
cm
function will also select tracks in the random order instead of the normal
progression. The Shuffle Play mode can be cancelled by pressing the button
again. Shuffle Play mode will also be cancelled by activating the Track Scan
cp cq
or Repeat Play
cs
DISC EJECT ( )
By pressing this button, the disc will be ejected and the unit will change to either
radio, cassette or CD changer mode depending on which was last in use before
CD player mode was selected.
If the disc is not removed from the disc slot within 10 seconds of being ejected,
it will automatically be re-loaded into the unit to prevent it from being acciden-
tally damaged (
loaded in the player). Play of the disc can be resumed by using the Mode
ct
Selector to choose CD player function.
ct
MODE SELECTOR
This button is used to select the audio source (radio, CD player, cassette, or
optional CD changer) in play. Each press will change to the next source.
cu
TIME/FREQUENCY SELECTOR (T/F)
During radio operation, press this button to call the time display on the
incorporated quartz clock. Pressing the button again or activating any tuning
function will return to frequency display.
During CD player or CD changer operation, press this button to call the time
display or return to disc and track indications.
dl
RE-SET BUTTON
A Re-Set button is located on the front panel which must be activated by a pen
tip or other thin object as it is recessed to prevent accidental engagement. The
Re-Set circuitry is provided to protect the microprocessor circuitry and should
only be activated under the following circumstances as it will erase the time and
station pre-set memories.
1. Upon initial installation after all wiring is completed.
2. If there is a malfunction of any of the switches on the unit, pressing the Re-
Set button may clear the system and return to normal operation.
cr
functions.
functions.
will appear on the display panel indicating that a disc is
-6-