Table of Contents
Advertisement
Draught-free installation with sealing lips
8.2.1
Proposal:
Using the Installation Sealing Kit from Dometic
(available from Dometic)
In the recess intended for the refrigerator's installation, stop bars (B) are attached
below and on each side. These stop bars are subsequently provided with lip seals (C).
The upper seal of this recess(A) must be manufactured of a material capable of with-
standing high temperatures.
Ensure that the refrigerator is installed level in the
recess.
Finally, push the refrigerator into the recess from the front.
This installation option facilitates the removal and installation of the appliance for
servicing.
If the cavity between the caravan wall and the refrigerator is sealed so that fumes
cannot penetrate the living area it is possible to vent the flue gas directly through the
upper grille without using the aluminium flue pipe. The waste gases escape to the
outside through the upper grill of the ventilation.
Do not use any kind of aluminium flue pipe (e.g. T-piece) to lead the flue gas out.
The flues of the oven escape to the outside through the roof ventilator.
Deviations shall require the consent of the manufacturer.
Sealing resistant to high
temperature(200°C)
( e.g. HydroSil 3501)
Stop ledges
Lip seals
24
A
B
C
Truma-flue outlet
AK3
Hide quick links:
Advertisement
Table of Contents
