Advertisement
Connecting a Printer
1-8
If your software supports a printer connected to a terminal, you can connect a
serial printer directly to the terminal. You'll need an RS-232C interface cable
with a 9-pin, D-shaped female connector on one end.
1.
Plug the printer interface cable into the PR port on the back of the
terminal.
2. With an \Is-inch, flat-blade screwdriver, tighten the screws on both sides
of each connector until secure.
3. Attach the other end of the interface cable to the RS-232C port on the
printer .
• Note-The TEST port is for manufacturing purposes only. Do not use this port.
Appendix B lists typical pin connections for a printer.
Chapter 1
Advertisement
