Advertisement
Getting Ready
1-2
As you unpack your terminal, make sure you received everything shown
below. If anything is missing or visibly damaged, contact the dealer from
whom you purchased the terminal.
Power Cord
The keyboard cable and the power cord come with your terminal. You'll also
need an RS-232C interface cable (fitted with a female 25-pin connector on
one end) to connect the terminal to your computer. To connect a serial-type
printer directly to your terminal, you'll need a second RS-232C interface
cable. These cables can be purchased from your dealer.
The terminal should be located in an area
• Near a grounded, three-pronged power outlet.
• In an area with indirect lighting, and away from windows, if possible. Nearby
windows should be on either side of the terminal.
• Large enough to allow three inches of space around the terminal for
ventilation.
Chapter 1
Advertisement
