On/Off (Mode); Set Temperature; Fan; Ventilation Mode - Robertshaw smart 3000 Owner's Manual

On/Off (Mode)

Press the On/Off button to turn the thermostat ON or OFF and if permitted to
select heat only or cool only mode. The ON/OFF only Mode is set as default.
NOTE:
If the thermostat is OFF, the thermostat display will turn ON by simply
touching it.

Set Temperature

Adjust the target temperature with the Up or Down button. The range of
temperature adjustment may be limited if your installer implemented the Heat
and Cool limit settings.

Fan

Press the Fan button to cycle between auto fan and continuous fan mode.
Or, if you have three speeds available, press the Fan button to cycle between low,
medium, high and auto fan speeds. Press and hold the Fan button to turn the fan
ON continuously.

Ventilation Mode

If permitted, you can run the indoor fan only (Ventilation Mode) when the
SMART 3000 is OFF by pressing the Fan button. Each press of the Fan button will
cycle between all available fan speeds.
5