Quickset Programming Mode; Changing Fahrenheit (F) To Celsius (C) - Robertshaw 9610 User Manual

110-655B.qxd 11/27/06
3. Press
SET P
Temperature Differential*
*T T D
HE EMPERATURE IFFERENTIAL IS
THAT WHENEVER THE ROOM TEMPERATURE CHANGES BY ONE FULL DEGREE FROM
,
THE TEMPERATURE SETTING THE SYSTEM WILL TURN ON
,
ON TOO OFTEN INCREASE THE TEMPERATURE DIFFERENTIAL
4. Press
SET P
**T
HE RESIDUAL COOL FEATURE WILL KEEP THE SYSTEM FAN ON FOR AN ADDITIONAL
SECONDS AFTER THE COMPRESSOR CYCLES OFF
.
SETTING THE COOLING PROGRAM

Changing Fahrenheit (F) to Celsius (C)

Press and Hold SET
SET P
Release both simultaneously.
QuickSet™ Programming Mode*
PROG
MAN
SET PROG/MAN COOL-OFF-HEAT AUTO - ON
1. Place COOL-OFF-HEAT
in HEAT or COOL position.
2. Press & Hold SET. Press the d button.
Release simultaneously.
3. The MORN indicator should be blinking. Program the Time-of-Day and
the temperature as outlined in the Setting Daily Program section.
*QuickSet™ will program all 7 days of the week with the same program.
Individual days can then be changed or modified.
4:38 PM Page 6
Press
To change
F 1°. T
ACTORY PRESET AT HIS MEANS
. I
F THE SYSTEM TURNS
.
Press
To change
Residual Cooling**
. R C
ESIDUAL OOLING CAN ONLY BE PROGRAMMED WHEN
Press
COOL-OFF-HEAT
SET P
6
30, 60 90
OR