Load-Balancing Queues At The Fex Global Level - Cisco Nexus 6000 Series Configuration Manual

Load-balancing queues at the FEX global level

This example shows how to configure the slow drain feature on the N2232P FEX:
switch# configure terminal
switch(config)# fex N2232P
switch(config-fex)# hardware N2232P slow-port-error-disable-time 500
Load-balancing queues at the FEX global level
The Cisco Nexus 2248PQ provides 8 load balancing queues. These load balancing queues are designed to
resolve port congestion.
Procedure
Step 1
Step 2
Step 3
This example shows how to configure the load balance queues.
switch# configure terminal
switch(config)# fex 100
switch(config-fex)# hardware N2248PQ uplink-load-balance-mode
switch(config-fex)#
Cisco Nexus 6000 Series NX-OS Layer 2 Switching Configuration Guide, Release 7.x
184
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
fex chassis_id
Example:
switch(config)# fex 100
switch(config)#
hardware N2248PQ uplink-load-balance-mode
Example:
switch(config-fex)# hardware N2248PQ
uplink-load-balance-mode
Configuring the Fabric Extender
Purpose
Enters global configuration mode.
Enters configuration mode for the specified
FEX.
The range of the chassis_id value is 100 to
199.
Enables and disables load balancing queues
at the FEX global level.