Disassociating A Fabric Extender From An Interface; Configuring Fabric Extender Global Features - Cisco Nexus 6000 Series Configuration Manual

Disassociating a Fabric Extender from an Interface

Disassociating a Fabric Extender from an Interface
Before You Begin
Ensure that you have enabled the Fabric Extender feature.
Procedure
Step 1
Step 2
Step 3

Configuring Fabric Extender Global Features

You can configure global features on the Fabric Extender.
Before You Begin
Ensure that you have enabled the Fabric Extender feature set.
Cisco Nexus 6000 Series NX-OS Layer 2 Switching Configuration Guide, Release 7.x
168
Eth101/1/40 Eth101/1/39
Eth101/1/36 Eth101/1/35
Eth101/1/32 Eth101/1/31
Eth101/1/28 Eth101/1/27
Eth101/1/24 Eth101/1/23
Eth101/1/20 Eth101/1/19
Eth101/1/16 Eth101/1/15
Eth101/1/12 Eth101/1/11
Eth101/1/8 Eth101/1/7
Eth101/1/4 Eth101/1/3
Command or Action
configure terminal
Example:
switch# configure terminal
switch(config)#
interface {ethernet slot/port | port-channel
channel}
Example:
switch(config)# interface port-channel
4
switch(config-if)#
no fex associate
Example:
switch(config-if)# no fex associate
Configuring the Fabric Extender
Eth101/1/38 Eth101/1/37
Eth101/1/34 Eth101/1/33
Eth101/1/30 Eth101/1/29
Eth101/1/26 Eth101/1/25
Eth101/1/22 Eth101/1/21
Eth101/1/18 Eth101/1/17
Eth101/1/14 Eth101/1/13
Eth101/1/10 Eth101/1/9
Eth101/1/6 Eth101/1/5
Eth101/1/2 Eth101/1/1
Purpose
Enters global configuration mode.
Specifies the interface to configure. The interface
can be an Ethernet interface or a port channel.
If this is a 10G breakout port, the
Note
slot/port syntax is QSFP-module/port.
Disassociates the Fabric Extender unit attached
to the interface.