Cisco Nexus 6000 Series Configuration Manual page 187

Configuring the Fabric Extender
Procedure
Step 1
Step 2
Step 3
Step 4
Step 5
Command or Action
configure terminal
Example:
switch# configure
terminal
switch(config)#
fex FEX-number
Example:
switch(config)# fex 101
switch(config-fex)#
description desc
Example:
switch(config-fex)#
description Rack7A-N2K
no description
Example:
switch(config-fex)# no
description
type FEX-type
Example:
switch(config-fex)# type
N2248T
Cisco Nexus 6000 Series NX-OS Layer 2 Switching Configuration Guide, Release 7.x
Configuring Fabric Extender Global Features
Purpose
Enters global configuration mode.
Enters FEX configuration mode for the specified Fabric Extender.
The range of the FEX-number is from to 199.
(Optional)
Specifies the description. The default is the string FEXxxxx where
xxxx is the FEX number. If the FEX number is 123, the description is
FEX0123.
(Optional)
Deletes the description.
(Optional)
Specifies the type of Fabric Extender. The FEX-type is one of the
following:
• N2148T—48 1000 Base-T Ethernet host interfaces and 4
10-Gigabit SFP+ Ethernet fabric interfaces module
• N2224TP—24 100 Base-T/1000 Base-T Ethernet host interfaces
and 2 10-Gigabit SFP+ Ethernet fabric interfaces module
• N2232P and N2232TM—32 10-Gigabit SFP+ Ethernet host
interfaces and 8 10-Gigabit SFP+ Ethernet fabric interfaces
module
• N2232TP—32 10-Gigabit Base-T Ethernet host interfaces and
8 10-Gigabit SFP+ Ethernet fabric interfaces module
• N2232TT—32 10-Gigabit Base-T Ethernet host interfaces and
8 10-Gigabit Base-T Ethernet fabric interfaces module
• N2248T and N2248TP-E—48 100 Base-T/1000 Base-T Ethernet
host interfaces and 4 10-Gigabit SFP+ Ethernet fabric interfaces
module.
• N2248PQ—48 10-Gigabit SFP+ Ethernet host interfaces and 16
10-Gigabit SFP+ Ethernet fabric interfaces module.
• NB22HP—16 1G/10-Gigabit SFP+ Ethernet host interfaces and
8 10-Gigabit SFP+ Ethernet fabric interfaces module
169