Table of Contents
Advertisement
2 SYSTEM CONFIGURATION AND USABLE FUNCTIONS
Applicable CPU module
CPU type
C Controller
2
2 - 2
CPU model
Q06CCPU-V
Q06CCPU-V-B
1 Limited within the range of I/O points for the CPU module.
2 Can be installed to any I/O slot of a base unit.
3 Connection of extension base units is not available with any safety
CPU.
(b) Mounting to a MELSECNET/H remote I/O station
The table below shows the network modules and base units applicable to
the QD51(-R24) and quantities for each network module model.
Depending on the combination with other modules or the number of
mounted modules, power supply capacity may be insufficient.
Pay attention to the power supply capacity before mounting modules, and if
the power supply capacity is insufficient, change the combination of the
modules.
Applicable network
No. of modules
module
QJ72LP25-25
QJ72LP25G
Up to 64
QJ72LP25GE
QJ72BR15
1 Limited within the range of I/O points for the network module.
2 Can be installed to any I/O slot of a base unit.
REMARKS
The Basic model QCPU module or C Controller module cannot create the
MELSECNET/H remote I/O network.
(2) Support of the multiple CPU system
When using the QD51(-R24) in a multiple CPU system, refer to the QCPU
User's Manual (Multiple CPU System) first.
(a)
Compatible QD51(-R24)
If using the QD51(-R24) on a multiple CPU system, use function version B
of the QD51(-R24) .
1
No. of modules
Main base unit
N/A
1
Main base unit of
remote I/O station
MELSEC-Q
2
Base unit
Extension base unit
: Applicable,
: N/A
2
Base unit
Extension base unit of
remote I/O station
: Applicable,
: N/A
2 - 2
Advertisement
Table of Contents
