3.1
Main body
3.1.1 Removing the rear cabinet
(See Fig.1 to 3)
(1) Remove the six screws A (both side) attaching the side
protector by 6 angle wrench. (See Fig.1)
(2) Remove the eight screws B (both side) attaching the woof-
er, and then disconnect the speaker wires. (See Fig.2)
(3) Remove the ten screws C attaching the rear cabinet, and
then disconnect the grand wire from tuner board. (See
Fig.3)
1-8 (No.MB519)
SECTION 3
DISASSEMBLY
A
A
Fig.1
B
B
Fig.2
E
C
K
Fig.3
C