Removing The Display Control Board - JVC RV-NB10BJ Service Manual

3.1.8 Removing the display control board

(See Fig.12 to 14)
(1) Disconnect the connector wire connected to
guitar and mic. jack board. (See Fig.12)
(2) Remove the four screws M attaching the display control
board. (See Fig.13)
(3) Disconnect the card wire connected to
servo board. (See Fig.14)
CN751 from
CN404 from CD
CN751
Fig.12
M
Fig.13
CN404
Fig.14
(No.MB519)1-13