NETGEAR R6900P User Manual page 37

Nighthawk AC1900 Smart WiFi Router Model R6900P
5. From the Internet Connection Type menu, select Fixed.
6. Configure the fixed IPv6 addresses for the WAN connection:
• IPv6 Address/Prefix Length. The IPv6 address and prefix length of the router WAN interface.
• Default IPv6 Gateway. The IPv6 address of the default IPv6 gateway for the router's WAN interface.
• Primary DNS Server. The primary DNS server that resolves IPv6 domain name records for the
router.
• Secondary DNS Server. The secondary DNS server that resolves IPv6 domain name records for
the router.
Note If you do not specify the DNS servers, the router uses the DNS servers that are
configured for the IPv4 Internet connection on the Internet Setup page. (See
Set Up the Internet Connection
7. Select an IP Address Assignment radio button:
• Use DHCP Server. This method passes more information to LAN devices but some IPv6 systems
might not support the DHCv6 client function.
• Auto Config. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your home network (the
LAN).
8. In the IPv6 Address/Prefix Length fields, specify the static IPv6 address and prefix length of the router's
LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC address.
9. Click the Apply button.
Your settings are saved.
on page 25.)
Specify Your Internet Settings
37
Manually