Install Openvpn Software On A Mac Computer - NETGEAR R6900P User Manual

Nighthawk AC1900 Smart WiFi Router Model R6900P
The window displays the progress of the installation and then displays the final installation window.
16. Click the Finish button.
17. Unzip the configuration files that you downloaded in Step 6 and copy them to the folder in which the
OpenVPN client utility is installed on your computer.
If your device is a Windows 64-bit system, the OpenVPN client utility is installed by default in the
C:\Program files\OpenVPN\config\
18. Modify the VPN interface name to NETGEAR-VPN:
a. In Windows, select Start > Control Panel > Network and Internet > Network Connections (or
Network and Sharing Center).
The network information displays.
b. In the local area connection list, find the local area connection with the device name TAP-Windows
Adapter.
c. Select the local area connection and change its name (not its device name) to NETGEAR-VPN.
If you do not change the VPN interface name, the VPN tunnel connection will fail.
For more information about using OpenVPN on a Windows-based computer, visit
openvpn.net/index.php/open-source/documentation/howto.html#quick.

Install OpenVPN Software on a Mac Computer

You must install Open VPN software on each computer that you plan to use for VPN connections to your
router.
To install VPN client software on a Mac computer:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
folder.
Use VPN to Access Your Network
181