Manage The Dhcp Server Address Pool - NETGEAR R6900P User Manual

Nighthawk ac1900 smart wifi router
Hide thumbs Also See for R6900P:
Table of Contents

Advertisement

5.
From the RIP Direction menu, select the RIP direction:
Both. The router broadcasts its routing table periodically and incorporates information that it receives.
This is the default setting.
Out Only. The router broadcasts its routing table periodically but does not incorporate the RIP
information that it receives.
In Only. The router incorporates the RIP information that it receives but does not broadcast its routing
table.
6.
From the RIP Version menu, select the RIP version:
Disabled. The RIP version is disabled. This is the default setting.
RIP-1. This format is universally supported. It is adequate for most networks, unless you are using
an unusual network setup.
RIP-2. This format carries more information. Both RIP-2B and RIP-2M send the routing data in RIP-2
format. RIP-2B uses subnet broadcasting. RIP-2M uses multicasting.
7.
Click the Apply button.
Your settings are saved.

Manage the DHCP Server Address Pool

By default, the router acts as a Dynamic Host Configuration Protocol (DHCP) server. The router assigns IP,
DNS server, and default gateway addresses to all computers that are connected to its LAN and WiFi network.
The assigned default gateway address is the LAN address of the router.
These addresses must be part of the same IP address subnet as the router's LAN IP address. The default
DHCP address pool is 192.168.1.2–192.168.1.254.
The router delivers the following parameters to any LAN device that requests DHCP:
An IP address from the range that you define
Subnet mask
Gateway IP address (the router's LAN IP address)
DNS server IP address (the router's LAN IP address)
To specify the pool of IP addresses that the router assigns:
1.
Launch a web browser from a computer or mobile device that is connected to the network.
2.
Enter http://www.routerlogin.net.
A login window opens.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
Nighthawk AC1900 Smart WiFi Router Model R6900P
Manage the WAN and LAN Network Settings
123

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents