NETGEAR R6900P User Manual page 152

Nighthawk AC1900 Smart WiFi Router Model R6900P
To set up bridge mode:
1. Make a note of the WiFi settings of the other router to which this router will connect.
You must know the SSID, WiFi security mode, WiFi password, and operating frequency (either 2.4 GHz
or 5 GHz).
2. Launch a web browser from a computer or mobile device that is connected to the network.
3. Enter http://www.routerlogin.net.
A login window opens.
4. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
5. Select ADVANCED > Advanced Setup > Router / AP / Bridge Mode.
The Router / AP / Bridge Mode page displays.
6. Select the Bridge Mode radio button.
Note By default, the router is set to receive its IP address and DNS server addresses
dynamically. However, you can manually assign a specific (static) IP address and
DNS server addresses to the router for its operation in bridge mode. We recommend
that you do not use static IP addresses unless you are familiar with network
configuration.
Manage the WiFi Network Settings
152