Use Wps To Add A Device To The Wifi Network; Use Wps With The Push Button Method - NETGEAR R6900P User Manual

Use WPS to Add a Device to the WiFi Network

WPS (Wi-Fi Protected Setup) lets you connect a WiFi-enabled computer or mobile device to the router's
network without entering the WiFi network passphrase or key. Instead, you use a WPS button or enter a
PIN to connect.
If you use the push button method, the computer or device that you are trying to connect must provide either
a physical button or a software button. If you use the PIN method, you must know the PIN of the computer
or device that you are trying to connect.
WPS supports WPA and WPA2 WiFi security. If your router network is open (no WiFi security is set, which
is not the default setting for the router), connecting with WPS automatically sets WPA + WPA2 WiFi security
on the router network and generates a random passphrase. You can view this passphrase (see
Basic WiFi Settings on page 138).

Use WPS With the Push Button Method

For you to use the push button method to connect a WiFi device to the router's WiFi network, the WiFi device
that you are trying to connect must provide either a physical button or a software button. You can use the
physical button and software button to let a WiFi device join only the main WiFi network, not the guest WiFi
network.
To let a WiFi device join the router's main WiFi network using WPS with the push button
method:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
A login window opens.
3. Enter the router user name and password.
The user name is admin. The default password is password. The user name and password are
case-sensitive.
The BASIC Home page displays.
4. Select ADVANCED > WPS Wizard.
The page displays a description of the WPS method.
5. Click the Next button.
By default, the Push Button (recommended) radio button is selected.
Nighthawk AC1900 Smart WiFi Router Model R6900P
Manage the WiFi Network Settings
136
Specify