Specify Basic Wifi Settings - NETGEAR R6900P User Manual

6. Select the PIN Number radio button.
7. In the Enter Clients' PIN field, enter the PIN number of the WiFi device.
8. Click the Next button.
For four minutes, the router attempts to find the WiFi device (that is, the client) that you want to join the
router's main WiFi network.
During this time, the WiFi LED on the top panel of the router blinks white.
9. Within four minutes, go to the WiFi device and use its WPS software to join the network without entering
a password.
After the router establishes a WPS connection, the WiFi LED lights solid white and the Add WPS Client
page displays a confirmation message.
10. To verify that the WiFi device is connected to the router's main WiFi network, select BASIC > Attached
Devices.
The WiFi device displays onscreen.

Specify Basic WiFi Settings

The router comes with preset security. This means that the WiFi network name (SSID), network key
(password), and security option (encryption protocol) are preset in the factory. You can find the preset SSID
and password on the router label.
Note The preset SSID and password are uniquely generated for every device to protect
and maximize your WiFi security.
If you change your preset security settings, make a note of the new settings and store it in a safe place
where you can easily find it.
If you use a WiFi computer to change the SSID or other WiFi security settings, you are disconnected when
you click the Apply button. To avoid this problem, use a computer with a wired connection to access the
router.
To specify basic WiFi settings:
1. Launch a web browser from a computer or mobile device that is connected to the network.
2. Enter http://www.routerlogin.net.
Nighthawk AC1900 Smart WiFi Router Model R6900P
Manage the WiFi Network Settings
138