Table of Contents
Advertisement
Nighthawk AC1900 Smart WiFi Router Model R6900P
5.
From the Internet Connection Type menu, select 6to4 Tunnel.
The router automatically detects the information in the Router's IPv6 Address on LAN field. This field
shows the IPv6 address that is acquired for the router's LAN interface. The number after the slash (/)
is the length of the prefix, which is also indicated by the underline (_) under the IPv6 address. If no
address is acquired, the field displays Not Available.
6.
Select a Remote 6to4 Relay Router radio button:
•
Auto. Your router uses any remote relay router that is available on the Internet. This is the default
setting.
•
Static IP Address. Enter the static IPv4 address of the remote relay router. Your IPv6 ISP usually
provides this address.
7.
Select an IPv6 Domain Name Server (DNS) Address radio button:
•
Get Automatically from ISP. Your ISP uses DHCP to assign your DNS servers. Your ISP
automatically assigns this address.
•
Use These DNS Servers. If you know that your ISP requires specific servers, select this option.
Enter the IP address of your ISP's primary DNS server. If a secondary DNS server address is
available, enter it also.
8.
Select an IP Address Assignment radio button:
•
Use DHCP Server. This method passes more information to LAN devices but some IPv6 systems
might not support the DHCv6 client function.
•
Auto Config. This is the default setting.
This setting specifies how the router assigns IPv6 addresses to the devices on your home network (the
LAN).
9.
(Optional) Select the Use This Interface ID check box and specify the interface ID to be used for the
IPv6 address of the router's LAN interface.
If you do not specify an ID here, the router generates one automatically from its MAC address.
10.
Click the Apply button.
Specify Your Internet Settings
35
Hide quick links:
Advertisement
Table of Contents
