Setscrew A
Fig. 1
Face cover
Fig. 2
Bobbin winder
Flange plate
Fig. 3
Fig. 4
Changing external parts
Top cover
Carrying
handle
Setscrew C
Setscrew B
Top cover
To remove:
1. Raise the carrying handle and remove the setscrew A.
2. Open the top cover. Pull out the flange plate from the
bobbin winder spindle (see fig. 2).
3. Remove the setscrews B and C.
4. Open the face cover. Close the top cover.
Raise the carrying handle.
Pull the top cover toward you to remove it (see fig. 4).
To attach:
1. Follow the above procedure in reverse.
To attach the flange plate, put the flange plate into the
bobbin winder, and push the flange plate down.
Turn the flange plate until it snaps to the pin of the
bobbin winder spindle (see fig 5).
Fig. 5
Pin
2