Mac Authentication - ZyXEL Communications AX Series User Manual

Table 34 Network Setting > Wireless > Guest/More AP > Edit (continued)
LABEL
Cancel
OK

7.5 MAC Authentication

Use this screen to give exclusive access to specific devices (Allow) or exclude specific devices from
accessing the Zyxel Device (Deny), based on the MAC address of each device. Every Ethernet device
has a unique factory-assigned MAC (Media Access Control) address, which consists of six pairs of
hexadecimal characters, for example: 00:A0:C5:00:00:02. You need to know the MAC addresses of the
device you want to allow/deny to configure this screen.
Use this screen to view your Zyxel Device's MAC filter settings and add new MAC filter rules. Click
Network Setting > Wireless > MAC Authentication. The screen appears as shown.
Figure 79 Network Setting> Wireless > MAC Authentication
The following table describes the labels in this screen.
Table 35 Network Setting > Wireless > MAC Authentication
LABEL
General
SSID
MAC Restrict
Mode
MAC address List
Chapter 7 Wireless
DESCRIPTION
Click Cancel to exit this screen without saving any changes.
Click OK to save your changes.
DESCRIPTION
Select the SSID for which you want to configure MAC filter settings.
Define the filter action for the list of MAC addresses in the MAC Address table.
Select Disable to turn off MAC filtering.
Select Deny to block access to the Zyxel Device. MAC addresses not listed will be allowed to
access the Zyxel Device.
Select Allow to permit access to the Zyxel Device. MAC addresses not listed will be denied
access to the Zyxel Device.
AX/DX/EX/PX Series User's Guide
138