Display Function - Miele PG 8080U Operating Instructions Manual

Commissioning

Display function

General
The display is used to select or set the
following:
– the program
– the delay start time
– the settings
During a program, the display shows
the following:
– the program stage
– the estimated time left for the
program to run
– any relevant fault messages and
information
In order to save energy, the
commercial dishwasher will switch to
Standby-mode within a few minutes if
no program is running and no button
is pressed. After several more minutes
it switches off completely (see
"Operating the commercial
dishwasher, Standby").
To turn the commercial dishwasher
back on, press the  button.
18
Settings menu
The Settings menu allows you to
change machine's electronic to suit
special requirements.
You can access the Settings menu by
pressing a specific button combination.
For further information see "Settings
menu".
In the Settings menu, the normal
functions of the buttons underneath the
display are not active allowing you to
select and confirm menu items with
these buttons.
The left and right arrows in the display
indicate that additional selections are
available. You can use the arrow
buttons underneath the display, as
appropriate, to select these further
options.
Use the centre button underneath the
display to confirm messages or settings
and to switch to the next menu or
submenu.
A check  will appear beside the
option which is currently selected.