4.5
Installing and Removing a Memory Card
This section describes a procedure for installing and removing a memory card.
(1) For Q2MEM type memory cards
(a) Installing a memory card
Pay attention to the direction of a memory card.
Insert the card securely into the connector of a CPU module until the height of the card reaches that of the
memory card EJECT button.
(b) Removing a memory card
Press the memory card EJECT button and pull out the memory card.
Basic
Note 4.1
Universal
The Basic model QCPU, Q00U(J)CPU, Q01UCPU, and QnUDVCPU do not support the use of a memory card.
Memory card
EJECT button
CPU module
Memory card
Insertion direction check
(
mark)
Memory card
EJECT button
CPU module
Push
Memory card
CHAPTER 4 INSTALLATION AND WIRING
Note 4.1
Note 4.1
4
95