Mounting And Removing A Terminal Block - Mitsubishi Electric Q26UD(E)HCPU User Manual

4.4

Mounting and Removing a Terminal Block

This section describes a procedure for mounting and removing an 18-point terminal block.
(1) Removal procedure
Terminal block
mounting screw
(2) Mounting procedure
Place the terminal block in position, and then tighten the two terminal block mounting screws (upper and lower).
For mounting and removal of other terminal blocks, refer to the user's manual for the module used.
94
1.
Open the terminal cover and loosen the terminal
block mounting screw.
2.
Remove the terminal block.