Chapter 2 Connections And Controls; Rear Panel - Datavideo SE-500HD Instruction Manual

Chapter 2

2.1 Rear Panel

1
1 HDMI Video Output (Program / Multiview)
2 HDMI Video Input 1-4
3 Ethernet Port
4 USB F/W Upgrade Port
5 TALLY Output Port
Connections and Controls
2
3 5
4
6 MIC IN – CH1/CH2
7 Audio Input – Stereo RCA (Left/Right)
8 Audio Output – Stereo RCA (Left/Right)
9 Power Switch
10 DC IN
1. HDMI Video Output – Program / Multiview
The SE-500HD provides two HDMI video output channels
which can be connected to HDMI video display. Program is
user assignable program output and Multiview outputs
quad view of the four HDMI inputs.
2. HDMI Video Input 1-4
The SE-500HD provides four HDMI video input channels for
connecting HDMI video sources.
3. Ethernet Port
Remote control feature under development
4. USB F/W Upgrade Port
USB port for firmware upgrade. Please refer to the
Firmware Upgrade section for the procedure.
5. TALLY Output Port
Sends Red, and Green tally signals to each channel.
Red indicates On-Air, and Green indicates next camera
source. Tally output port can connect other Datavideo
peripheral devices such as ITC-100, ITC-200, AM-100 or
7
7 8 9
6
10