1. Enter WAN1 VPI: 0 and VCI: 32.
2. Select WAN1 AAL5 Encap:
3. Enter LAN IP: 192.168.0.1
4. Enter LAN Sub-net Mask: 255.255.255.0
5. Enter Gateway: 192.168.0.254
The Gateway is directly pointed to the BAS IP.
6. Enter DNS Server : 168.95.1.1 and 168.95.192.1
7. Click
8. The screen will prompt the new configured parameters. Check the parameters
and click
to configure other parameters.
Console Configuration
Do the following steps:
1. User: admin password: admin
2. enable supervisor password: root
3. setup mode Bridge
4. wan Interface number (1~8): 1
Protocol : Ethernet
vpi_vci: 0
32
encap: LLC
. The router will reboot with the new setting or click
5