Assigning Resource Term Names And Values - HP 16550A User Reference

The Trigger Menu

Assigning Resource Term Names and Values

Assigning Resource Term Names and Values
The Terms field identifies the list of available resource terms within the
analyzer. The resource term names (a − j, Edge1, Edge2, Range1, Range2)
are default names that can be changed if desired. You assign values in the
following two ways:
•
Using Preset Values
•
Bit by Bit Assignment
Using Preset Values
When any of the individual term fields are selected, a configuration pop-up
appears. Use this pop-up menu to quickly assign the resource term to a
preset value, or, assign a customized name to the resource term.
Terms
a - j
Edge1,2
Range 1,2
Timer 1,2
Assign All of the available resource terms except the Edge terms can be
assigned to any analyzer. However, a term can only be assigned to one
analyzer at a time. When either resource term is selected, it toggles
between analyzers.
5–28
Assign
Rename
Clear (=x)
Set (=1)
Reset (=0)
Assign
Rename
Clear