Installing The Bluetooch Card - Toshiba TECRA S1 Maintenance Manual

4.11 Bluetooth Card
Installing the Bluetooth Card
Install the Bluetooth card according to the following procedures and Figures 4-28.
1. Connect the SUMI-cards to CN2 on the system board.
2. Place the Bluetooth card in the correct position.
3. Connect the antenna cable to the Bluetooth card with the tweezers.
CAUTION: Do not touch the connectors on the Bluetooth card and in the computer with
bare hands. Bluetooth cards can fail if they are contaminated with sweat, natural oils, etc.
from your hands.
4. Secure the Bluetooth card with one M2x3 white flat-head screw.
TECRA S1 Maintenance Manual
Downloaded from www.Manualslib.com manuals search engine
4 Replacement Procedures
4-45