4.6 Touch Pad
4
1
4.6
Removing the Touch Pad
Remove the touch pad according to the following procedures and Figures 4-17 and 4-18.
1. Remove the touch pad by pushing it in the direction of the arrow from battery pack
2. Release the following 17 latches on the touch pad cover, in that order:
3. Push the touch pad toward right and release the five bottom latches.
4. Disconnect the touch pad cable from CN8.
TECRA S1 Maintenance Manual
Downloaded from
www.Manualslib.com
Touch Pad
position.
- One latch on the left and three latches on the right sides
- Six top latches
- Five bottom latches
Figure 4-17 Removing the touch pad
manuals search engine
4 Replacement Procedures
4-31