4 Replacement Procedures
4.5 WLAN Card
Installing the WLAN Card
Install the WLAN card according to the following procedures.
1. Route the black antenna cable around the memory door screw hole.
2. Connect the two antenna cables to the WLAN card. Connect the white WLAN antenna (main)
to the #1 connector, and the black WLAN antenna (auxiliary) to the #2 connector.
3. Insert the WLAN card into the connector on the motherboard at a 45 degree angle.
4. Press down the WLAN card and secure it with one M2x3 screw, as indicated in Figure 4.7.
Satellite M600/M640/M645/M647 Maintenance Manual
4-18
Downloaded from LpManual.com Manuals