Password - TP-Link TL-WR841N User Manual

Chapter4 Configure
Reboot
Click thi s bwtton to reboot this device.
Re boot
Sorne settings of the router will take effect only after rebooting, including:
• Change the LAN IP Address (system will reboot automatically).
• Change the DHCP Settings.
• Change the Web Management Port.
• Upgrade the firmware of the router (system will reboot automatically).
• Restore the router toits factory defaults (system will reboot automatically).
• Update the configuration with the file (system will reboot automatically).
4. 16. 7. Password
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
2. Go to System Tools
>
Password, and you can change the factory default username
and password of the router.
Password
Usemame and password can contain betwee n 1 - 15 charaders and may not indude spaces
Old User Name:
Old Password:
New User Name:
New Password:
Confirm New Password:
Save
J [
Clear Ali
J
lt is strongly recommended that you change the default username and password of
the router, for all users that try to access the router's web-based utility or Quick Setup
will be prompted for the router's username and password.
Il'
Note:
The new username and password must not exceed 15 characters and not include any spacing.
3. Click Save.
4. 16. 8. System Log
1. Visit http://tplinkwifi.net, and log in with the username and password you set for
the router.
69