Maintenance Page Definitions; Table 13: Maintenance Page Definitions - Grandstream Networks DP750 Administration Manual

Maintenance Page Definitions

Firmware Upgrade
Selects how firmware upgrade request will be sent: "Always Check for New
Firmware Upgrade
Firmware", "Check New Firmware only when F/W pre/suffix changes", or "Always
and Provisioning
Skip the Firmware Check".
HTTP/HTTPS User
Enters user name to authenticate with HTTP/HTTPS server.
Name
HTTP/HTTPS
Enters password to authenticate with HTTP/HTTPS server.
Password
Always send HTTP
Includes configured user name and password in HTTP request before receiving
Basic Authentication
authentication challenge from the server. Default is No.
Information
Verify host when
Verifies host name in server certificate when using HTTPS. Default is Yes.
using HTTPS
Selects firmware upgrade method: TFTP, HTTP or HTTPS.
Upgrade via
Sets IP address or domain name of firmware server. The URL of the server that
Firmware Server
Path hosts the firmware release. Default is fm.grandstream.com/gs.
Note: Make sure to not prepend address with "http://" or any other protocol.
Firmware File Checks if firmware file is with matching prefix before downloading it. This field
Prefix enables user to store different versions of firmware files in one directory on the
firmware server.
Firmware File Checks if firmware file is with matching postfix before downloading it. This field
enables user to store different versions of firmware files in one directory on the
Postfix
firmware server.
Obtains configuration and upgrade server's information from DHCP server using
Allow DHCP
Option 43 and options 66 and 43.
Option 66 to Note: If DHCP Option 66 is enabled, the base will attempt downloading the
Override Server firmware file from the server URL provided by DHCP, even though Firmware
Server Path is left blank.
Automatic Specifies when the firmware upgrade process will be initiated; there are 4 options:
Upgrade

Table 13: Maintenance Page Definitions

 No: Base station will only do upgrade once at boot up.
 Check every X minutes: User needs to specify a period in minutes.
 Check every day: User needs to specify "Hour of the day (0-23)".
DP750/DP720 Administration Guide
P a g e | 52