Dect Page Definitions; Table 11: Dect Page Definitions - Grandstream Networks DP750 Administration Manual

Disable Call Waiting Disables playing call waiting tone during active call when receiving a second
Tone incoming call. The CWCID will still be displayed. Default is No.
Disable Call Waiting Enables call waiting for accounts using this profile which are set to Parallel ring
in Parallel Mode mode.
Disable Visual MWI Disables use of visual message waiting indicator when there is an unread
voicemail message. Default is No.
Transfer on Transfers the call to the other party if the conference initiator hangs up. Default is
Conference Hang-up No.
Ring Timeout Stops ringing when incoming call is not answered within a specific period of time.
Default is 60 seconds.
Hunting Group Ring Forwards incoming call to the next member of a hunt group if not answered within
Timeout a specific period of time. Default is 20 seconds.
Sets "From", "Privacy" and "P_Asserted_Identity" headers in outgoing INVITE
Send Anonymous
message to "anonymous", blocking caller ID. Default is No.
Rejects incoming calls with anonymous caller ID with "486 Busy here" message.
Anonymous Call
Rejection Default is No.
Selects Soft switch vendors' special mode. Example of vendors: Broadsoft,
Special Feature
CBCOM, RNK, Huawei, ZTE IME, Phone Power, Metaswitch. Default is Standard.

DECT Page Definitions

General Settings
Base Station Name Displays the name of the base station. Default is
address].
Admin PIN Code Configures admin PIN code for authentication. Default is 0000.
Enable Repeater Enables the base station repeater mode to associate with available repeaters.
Mode Once enabled the base station start searching for nearby repeaters and open
subscription to associate with the available repeaters. This option requires
rebooting the base station to take effect. Default is No.
Note: Grandstream's repeater is not officially released.
Enable Repeater Enables base station network management of discovered and paired repeaters.
Management Once enabled, users need first to reboot the base station to take effect, then login
on the web UI and browser to Status page, a new tab "DECT Repeater Status" will

Table 11: DECT Page Definitions

DP750/DP720 Administration Guide
DP750[last 6 digits of MAC
P a g e | 47