Table of Contents
Advertisement
Engine Specifications— 3-Phase Models (Continued)
Flex Plate to Rotor Bolt Torque
— ft. lbs. (Nm)
Cylinder Head Torque— ft. lbs. (Nm)
Initial ft. lbs (Nm)
Final ft. lbs (Nm) (2-step
intervals)
Flex Plate to Flywheel Bolt Torque
— ft. lbs. (Nm)
Generator Adapter Plate to
Flywheel Housing Bolt Torque
— ft. lbs. (Nm)
Overbolt Torque— ft. lbs. (Nm)
Inlet Water Line Hose I.D.— in.
(mm) (seawater pump inlet)
Outlet Water Line Hose I.D.
— in. (mm) (mixing elbow outlet)
Fuel Inlet— (fuel pump inlet)
Fuel Return Size— Type
The generator set has a relay controller with hourmeter.
For a description of the controller, see Section
2— Operation.
Controller Features
D Electric starting with a start/stop switch located on
the controller or by (optional) remote start
D Rubber mounted to minimize vibration
D Safety shutdowns for overheating, low oil
pressure, and overspeed (optional)
1-10 Specifications
14CCOZ/
11.5CCFOZ
Controller
D Starter interlock to prevent reengagement of
D Controller connections by plugs/receptacles and
D Quick disconnect on 22-pin wiring harness
D External 6-pin connector for remote panel harness
D Hourmeter for scheduling maintenance
D Voltage/frequency
20CCOZ/
17.5CCFOZ
30 (41)
29 (39)
58 (79)
20 (27)
30 (41)
30 (41)
1.0 (25)
3 (76)
3/8 ID— 1/4 NPT
3/8 ID— 1/4 NPT
starter whenever engine is running
clearly identified corrosion-resistant terminals to
eliminate the possibility of misconnection
adjustable
voltage regulator
24CCOZ
20CCFOZ
PowerBoostä
TP-5592 7/96
Hide quick links:
Advertisement
Table of Contents
