Accessories - Kohler 13.5CCOZ Operation And Installation Manual

Kohler Co. offers several accessories to finalize the
installation or to add convenience to operation and
service. Contact a local Kohler distributor/dealer to
obtain the most current information. The following list
includes accessories available at the time of print of this
publication.
Seawater strainer available for inline installation
between seacock and seawater pump.
Siphon break mandatory kit on generators installed at
or below the waterline.
floatation water into the engine.
Sound shield provides for highly effective silencing,
ease of access for engine/generator servicing, low
maintenance, excellent durability, and safety.
The Kohler Ship-to-Shore Transfer Switch allows
immediate switching to Kohler generator set power or
shore power protecting the electrical system from the
possibility of simultaneous connection of both power
sources.
Line circuit breakers protect the generator from
extreme overload and provide protection for the output
cabling. Determine circuit breaker ampere rating by the
voltage configuration.
Remote start panel allows starting, stopping from a
location remote of the generator set. Supplied with 15 ft.
(4.6 m) connection harness.
dimensions are 4 1/16 in. (103 mm) by 2 1/8 in. (54mm)
with a minimum mounting depth of 2 1/4 in. (57 mm).
Remote start and two-meter panel kit allows
starting/stopping from a location remote of the
generator set. The illuminated gauges include an
engine oil pressure gauge and a water temperature
gauge. Overall dimensions are 6 in. (152 mm) by 6 in.
(152 mm) with a minimum mounting depth of 2 3/4 in. (70
mm). Requires Remote Connection/Extension Harness
for hook-up. Requires Sender Kit.
TP-5592 7/96

Accessories

Prevents the siphoning of
Overall mounting
Remote start and four-meter panel kit allows
starting/stopping from a location remote of the
generator set. The illuminated meters/gauges include a
DC voltmeter, engine oil pressure gauge, water
temperature gauge, and an hourmeter which records
total generator set operating hours. Overall dimensions
are 9 in. (229 mm) by 6 in. (152 mm) with a minimum
depth of 4 in. (102 mm).
Connection/Extension Harness for hook-up. Requires
Sender Kit.
Sender kit provides the necessary senders for making
remote meter panel gauges functional.
Preheat kit provides improved starting in cold climates.
Available for the following models only:
D 13.5CCOZ/11CCFOZ
D 14CCOZ/11.5CCFOZ
D 18.5CCOZ/15CCFOZ
D 20CCOZ/17.5CCFOZ
Twelve-inch (0.3 m) remote wiring harness has a
6-pin connector on one end which is keyed to the
controller box connector. The other end has pigtails for
connection to customer-supplied start switch, generator
ON light, hourmeter, etc.
Remote connection/extension harness provides
additional wiring between all remote panels and
controller connector in 15 ft. (4.6 m) or 25 ft. (7.6 m)
increments. One harness is required for each Remote
Meter Panel Kit. Extension limited to a total of four kits
and 75 ft.
Overspeed shutdown
protection from overspeed/voltage damage.
Heavy-duty battery cables are available for these
marine generator sets.
Flexible fuel lines connect the generator set to the
main fuel tank.
Fuel attachment block allows connection to the fuel
inlet and return from one point.
Coolant overflow extension hose allows remote
mounting of the coolant overflow bottle, 10.8 ft. (3.3m).
Requires Remote
kit provides additional
Specifications 1-11